How to Clone HDD to SSD on Huawei Laptop?

Written byMariaUpdated on Jun 06, 2024
Gerhard Chou
Approved byGerhard Chou

Table of Contents

Summary: Install a new SSD on your Huawei laptop and then clone all data from the old hard drive to the new SSD. Huawei disk cloning software - Donemax Disk Clone can help you securely and completely move all data including operating system from the old hard drive to the new SSD and create a new boot drive.


Regarding computer changes, switching from a hard disk drive (HDD) to a solid-state drive (SSD) is one of the best deals you can find. Compared to HDDs, SSDs have faster boot times, faster application launches, and generally snappier performance.

By cloning your HDD to SSD, you can move your entire operating system, files, and programs without any problems, keeping your current setup and settings. It saves you time and effort because you don't have to reload the operating system and apps individually.

clone HDD to SSD on Huawei laptop

Cloning also ensures you don't lose any files during the transfer process, so you keep all of your data. If you have a Huawei laptop and want to get the most out of an SSD update, copy your old HDD to the new one. In this guide, we will show you step-by-step instructions on how to do it.

Process Before Cloning HDD to SSD on Huawei Laptop

Make sure you have these things before you start the cloning process:

SSD: Buy an SSD that works with your HDD and has enough space to hold all of your info from the HDD.

Cloning Software: It would help if you got copy software to move the files from your HDD to your SSD. Donemax Disk Clone, Acronis True Image, Macrium Reflect, and Clonezilla are all popular choices.

Adapter: We will need an external case or adapter to connect the SSD to your laptop if it only has one drive spot during the cloning process.

Backup: In general, cloning is safe, but as a safety step, you should always back up your important files.

Cloning HHD to SSD on Huawei Laptop

To copy your Huawei laptop's HDD to SSD, do these things:

Step 1. Connect or install the SSD to your Huawei laptop and make sure the laptop can recognize it.

Step 2. Download and install the reliable Huawei disk cloning software - Donemax Disk Clone on your computer, then open it.

Windows - Donemax Disk Clone

  • Best Huawei disk cloning software.
  • Clone HDD to SSD on Huawei laptop.
  • Create bootable clone backup for Huawei laptop.

Step 3. Open Donemax Disk Clone, choose Disk Clone mode, then select the old hard drive as the source disk, select the SSD as the destination disk. (Don't select Sector by sector clone if the SSD is smaller than the old hard drive.) Click Next.

choose Disk Clone mode

Step 4. Preview the layout, then tick Check the option if the destination is SSD, click on Clone button to clone all data including operating system, programs, settings, user files from the old hard drive to the new SSD.

tick Check the option if the destination is SSD

Step 5. Once the process gets finished, just check the cloned data on the SSD and set the SSD as the boot drive in BIOS. (Turn on your laptop to the BIOS or UEFI settings to make the SSD the main boot drive. In the BIOS/UEFI settings, save the changes and back out.)

check the cloned data on the SSD

Install all the necessary drivers for your computer hardware's best speed and functionality. First, figure out your gear, like your graphics card, network adapter, sound card, and chipset. Most manufacturers include driver discs with their goods, but it's best to download them from their websites for the most up-to-date versions.

Huawei disk clone

After downloading, all you have to do is run the software files and follow the on-screen directions. Restarting your computer after loading the drivers is best so that the changes take effect. Updating drivers can fix compatibility problems, make the system more stable, and boost speed overall.

Troubleshooting Tips

If you have any problems during the cloning process or when you try to boot from the SSD, try the following recovery steps:

  • Check Compatibility: Ensure that the copy software works with your HDD and SSD and that the SSD will work with your Huawei laptop.
  • Check the Connections: Ensure that the SSD is fully connected to your laptop and that the cloning software can see it by checking all the connections again.
  • Update the firmware: Check to see if your SSD's firmware has been updated, and if it has, install it to get the best speed and compatibility.
  • Get Help With Technical Issues: You can ask for help from technology support if you can't figure out a problem independently.


Finally, switching from an HDD to an SSD in your Huawei laptop can make it run faster and respond more quickly. Cloning your HDD to SSD makes the switch smooth, so you don't have to worry about restarting the operating system and apps. Your data and settings will be saved.

Installing the right drivers also ensures everything works perfectly, and debugging tips can help with any problems that might come up along the way. Following these steps, you'll get the most out of your Huawei laptop after upgrading the SSD.

FAQs About Cloning HDD to SSD on Huawei Laptop

1. What is the best Huawei cloning software?

Here are reliable disk cloning programs can help in cloning HDD/SSD on Huawei laptop:

  • Donemax Disk Clone
  • Acronis True Image
  • AweClone for Windows
  • Macrium Reflect
  • Clonezilla

2. How to clone HDD to SSD on Huawei laptop?

You can use disk cloning software to securely clone HDD to SSD.

  • Download and install Donemax Disk Clone, open it.
  • Connect the SSD to the Huawei laptop.
  • Open Donemax Disk Clone, choose Disk Clone.
  • Select the old hard drive as the source disk, select the SSD as the destination disk.
  • Preview the clone layout and click on Clone button.
  • Clone all data from the hard drive to the SSD.

3. How to set the cloned SSD as the boot drive on Huawei laptop?

Make sure the SSD is connected to your Huawei laptop, then change the boot drive via Windows settings:

  • Open run command by pressing Windows key + R keys on the keyboard, type msconfig and press Enter.
  • Click on Boot tab from the window and check if SSD is displayed.
  • Click on the SSD you want to boot from and click on Set as default.
  • Click on Apply and OK.
  • Close the window, restart the PC and check if the issue is resolved.
Contributing Writer


Maria is one of the senior writers & editors of Donemax who lives and works in Sydney, Australia. She loves PC, Mac and Internet Technology. She has 6 years of writing articles about data recovery on PC/Mac, disk cloning solution, data eraser and computer OS optimization, etc. She is also interested in testing various software and digital products.

Gerhard Chou
Editor in chief

Gerhard Chou

In order to effectively solve the problems for our customers, every article and troubleshooting solution published on our website has been strictly tested and practiced. Our editors love researching and using computers and testing software, and are willing to help computer users with their problems